Peer-reviewed articles:

    1. E. Cenker, K. Yasutomi, K. Thuermer, K. Kondo, C. Wang, B. Adamson, G. Bruneaux, T. Aizawa, N. Hansen, and S. Skeen, “Comparison of TEM and HIM ex-situ analysis of soot particles sampled at Diesel engine conditions”, submitted to Aerosol Sci. Technol., 2018.
    2. Y. Chen, E. Cenker, D.R. Richardson, S.P. Kearney, B.R. Halls, S.A. Skeen, C.R. Shaddix, and D.R. Guildenbecher, “Single-camera, Single-shot, Time-resolved Laser-induced Incandescence Decay Imaging”, accepted Applied Optics (2018)
    3. A. Bennett, H. Amin, E. Cenker, and W.L. Roberts, “Measurements of pressure effects on PAH distribution and 2D soot volume fraction diagnostics in a laminar non-premixed coflow flame”, accepted Energy & Fuels (2018).
    4. D.R. Richardson, Y. Chen, B.R. Halls, D.R. Guildenbecher, E. Cenker, S. Skeen, and C. Shaddix, “Planar Soot Particle Sizing via Ultra-High-Speed LII Imaging”, submitted to AIAA Science and Technology Forum and Exposition, 2019.
    5. J. Du, E. Cenker, J. Sim, and W.L. Roberts, “Characterization of a non-reacting spray from a hollow cone injector with GCI fuels using phase Doppler anemometry” accepted to 14th ICLASS, 2018.
    6. B.A. Sforzo, K.E. Matusik, C.F. Powell, A.L. Kastengren, S. Daly, S. Skeen, E. Cenker, L.M. Pickett, C. Crua, and J. Manin, “Fuel nozzle geometry effects on cavitation and spray behavior at Diesel engine conditions”, 10th International Symposium on Cavitation, 2018.
    7. S. Daly, E. Cenker, S. Skeen and L.M. Pickett, “The effects of injector temperature on spray characteristics in heavy-duty diesel sprays”, SAE Technical Paper, 2018-01-0284 (2018).
    8. S. Skeen, K. Yasutomi, E. Cenker, B. Adamson, N. Hansen, L.M. Pickett, “Observations of soot optical property characteristics using high-speed, multiple wavelength, extinction imaging in heavy-duty diesel sprays”, SAE Technical Paper, 2018-01-0233 (2018).
    9. W. Boyette, E. Cenker, T. Guiberti, W.L. Roberts, “Laser-induced incandescence in turbulent non-premixed flames at elevated pressure”, 11th Asia-Pacific Conference on Combustion, 2017
    10. E. Cenker, A. Bennett, and W.L. Roberts, “Investigations of the long-term effects of LII on soot and bath gas”, Aerosol Sci. Technol., vol. 51: 1354–1367 (2017).
    11. E. Cenker, W.L. Roberts, “Quantitative effects of rapid heating on soot-particle sizing through analysis of two-pulse LII”, Appl. Phys. B, vol. 123: 74 (2017).
    12. S. Skeen, J. Manin, L.M. Pickett, E. Cenker, G. Bruneaux, T. Aizawa, F. Westlye, T. Tiexua, J. Oliver, S. Som, Y. Pei T. Lucchini, G. D’Errico, S. Pandurangi, M. Bolla, E. Hawkes, “A Progress review on soot experiments and modeling in the Engine Combustion Network (ECN)”, SAE Int. J. Engines, vol. 9, pp. 883-898 (2016).
    13. S. Kook, R. Zhang, Q.N. Chan, T. Aizawa, K. Kondo, L.M. Pickett, E. Cenker, G. Bruneaux, Ö. Andersson, J.H. Pagels, and E.Z. Nordin, “Automated detection of primary particles from transmission electron microscope (TEM) images of soot aggregates in Diesel engine environments”, SAE Int. J. Engines, vol. 9, pp. 279-296 (2016).
    14. E. Cenker, K. Kondo, G. Bruneaux, T. Dreier, T. Aizawa, and C. Schulz, “Assessment of soot-particle size imaging with LII at Diesel engine conditions”, Appl. Phys. B, vol. 119, pp. 765–776 (2015).
    15. E. Cenker, G. Bruneaux, T. Dreier, and C. Schulz, “Sensitivity analysis for soot-particle size imaging with laser-induced incandescence at high pressure”, Appl. Phys. B, vol. 119, pp. 745–763 (2015).
    16. E. Cenker, G. Bruneaux, T. Dreier, and C. Schulz, “Determination of small soot particles in the presence of large ones from time-resolved laser-induced incandescence”, Appl. Phys. B, vol. 118, pp. 169–183 (2015).
    17. E. Cenker, G. Bruneaux, L.M. Pickett, and C. Schulz, “Study of soot formation and oxidation in the engine combustion network (ECN), Spray A: Effects of ambient temperature and oxygen concentration”, SAE Int. J. Engines, vol. 6, pp. 352–365 (2013).

Other conferences:

    1. S. Daly, J. Manin, E. Cenker, S. Skeen and L.M. Pickett, “Visualizing fuel mixture fraction via high-speed extinction imaging of C70 fullerene doped diesel sprays” Western States Section of the Combustion Institute (WSSCI), 2018.
    2. A. Bennett, E. Cenker, and W.L. Roberts, “PAH and soot evolution at pressure in a laminar coflow non-premixed flame”, 10th Mediterranean Combustion Symposium, 2017.
    3. S. Chowdhury, E. Cenker, and W.L. Roberts, “KL measurements on a diluted, piloted, non-premixed ethylene jet flame at atmospheric pressure”, Proceedings of the 8th International Symposium on Turbulence, Heat and Mass Transfer, 2015.
    4. J. Lisanti, E. Cenker, and W.L. Roberts, “Comprehensive Laser-induced Incandescence (LII) modeling for soot particle sizing”, Proceedings of the European Combustion Meeting, 2015.

In preparation:

    1. E. Cenker, W. Boyotte, T. Guiberti and W.L. Roberts, “Soot volume fraction imaging of non-premixed ethylene jet flames at elevated pressure”, In preparation for Combustion and Flame.
    2. E. Cenker, A. Bennett, and W.L. Roberts, “Effects of soot volume fraction on temperature and LII particle sizing after rapid heating”, In preparation for Applied Physics B.
    3. J. Badra, J. Sim, J. Du, E. Cenker and W.L. Roberts, “Comparison of spray of light naphtha and Haltermann straight run naphtha from a hollow cone injector”, In preparation for FUEL.
    4. P. Mitra, E. Baldwin, D. Schmidt, K.E. Matusik, D. Duke, C.F. Powell, M. Arienti, J. Manin, K. Yasutomi, E. Cenker, P. Srivastava, P.K. Senecal, L.M. Pickett, “Identification and characterization of steady state spray conditions in convergent, single-hole Diesel injectors”, In preparation for Applied Energy.